How To Get Mildew Smell Out Of Washer

There's so much to love about a front-load washing machine but not the smell.

Front-load washers lock your laundry in a horizontal drum that tumbles your load through the wash, rinse, and spin cycles using only a small amount of water. And with no agitator on board, there's much less chance of damage like snags and tears. Front-loaders are energy efficient, better for the environment, and gentle on even the most delicate washables. A win all around!

But ask anyone who owns one, and even the most dedicated front-loader fan will tell you: sooner or later, they stink. As in, they smell bad. That musty, moldy odor is the dirty little secret lurking behind the door of every front-load washer. If your front load washer has you holding your nose, you're not alone, and there is a fix. These simple tips from Heritage Park Laundry Essentials will help you get your machine -- and laundry -- back to smelling sweet in no time.

Understanding the Source of the Smell

With all that's wonderful about front loaders, their stale musty smell seems to be a part of the package. The very thing that makes these machines so efficient and eco-friendly—the horizontal tumbling drum -- is the culprit. Over time, water, soap scum, and other laundry products build up inside the drum and components of the washer. This lays the perfect breeding ground for mold and mildew: dark damp, and grimy. Eventually, this smell can even transfer to laundry, leaving it smelling musty right out of the wash.

Note: if the smell you're noticing in your machine is not moldy or musty, but instead reminiscent of sewage, you may have a different issue caused by either a dried out drain trap or a blocked sewage vent pipe in your house (these typically vent out your roof and can be clogged by leaves, bird nests, etc.). Follow the recommendations below; if the smell persists, check drains and vent pipes, and consider bringing in a plumbing professional to resolve as sewer gas can be flammable and dangerous.

Getting the Musty Smell Out

Here at Heritage Park Laundry Essentials, we adore our front-loading machines. We were early adopters, and some of our machines are well into their second decades. These machines earn their keep; they get well-used on a daily basis with multiple loads of everything from delicate clothing and bed linens to heavy cotton bath towels to grimy baby and kid clothes layered with spills, spit-up, and dirt. With all that laundry, we've absolutely experienced moldy and musty smells in our machines. These tips for taming mildew and cleaning your front load washer come directly from our personal experience. We recommend trying them all to discover which work best for your machine and your routine.

1. Clean the rubber gasket. Don't skip this step! Every front-load washing machine has a rubber gasket, or door seal, right inside the door. This gasket is the front line on the war on mold and mildew; wipe it down thoroughly, going in between the rubber folds using a lint-free towel or microfiber cloth and an all-purpose cleaner.

2. Wipe down the washer drum and the inside of the washer door (window). You can use an ammonia-free all-purpose glass cleaner on the front and back of the window.

3. Remove and/or wipe down the dispenser drawer.These can be washed with simple liquid dish detergent to remove soap scum and detergent residue that have built up. Don't forget the inside of where the drawer goes. An old toothbrush is a great tool to get into the nooks and crannies. Please Do Notgive this brush back to your spouse after using it! This is now deemed the washing machine toothbrush. Be sure to replace the detergent tray prior to running any wash cycle.

4. Run an empty wash cycle with baking soda. Yes, plain old sodium bicarbonate that you likely have in your pantry right now! Baking soda is a safe and effective natural cleaner that is mildly alkaline and does a great job dissolving dirt and grease. Just add a half-cup right in the drum (NOT in the detergent dispenser as it will clump) and run an empty wash cycle on warm.

5. Run an empty wash cycle with distilled white vinegar. White vinegar (again, you probably have some in your pantry) is naturally antibacterial and antifungal. Pour two cups into the detergent dispenser of your washing machine and run an empty cycle on hot.

6. Run an empty wash cycle with liquid chlorine bleach. Chlorine bleach is a powerful disinfectant that does a wonderful job tackling all manner of bacteria and germs. Pour two cups into the detergent dispenser of your machine and run an empty cycle at the hottest temperature for the longest time possible. If you have a "soak" setting on your machine, use it; if not, pause cycle mid-way through for an hour to allow the bleach to permeate all parts of the machine.

NOTE: handle household bleach with care, as it is a caustic chemical that can burn skin and remove the color from clothes. Also, an important reminder from high-school Chemistry class: NEVER mix bleach with any other chemicals, especially ammonia or ammonia-based chemicals. This forms toxic chloramine gas, which can be lethal.

7. Use a commercially available washing machine cleaner. There are many options for specially formulated washing machine cleaners, including a washing machine cleaner tablet such as Affresh or a liquid-like Clorox Washing Machine Cleaner, and follow product directions. These one-step products are convenient and easy to use but more costly than the budget-friendly DIY options above.

Many machines also have a cycle setting especially for cleaning that can be run.

8. Consider periodically opening up your drain pump filter and wiping out any moisture and residue buildup that may have collected inside. This is also a good final step for deep cleaning. You may also find and be able to remove small items that are caught in the filter that are preventing your washer from draining thoroughly. ALWAYS unplug your machine before opening the drain pump door.

See 'Important Notes' below before starting this step.

Open the cover to the drain filter - this may require a flat head screwdriver to gently pry the door open.

Make sure you have a shallow bowl or pan tucked all the way under the drain to catch excess water.

Following the manufacturer's instructions, unscrew the filter and allow the water to drain.

Use mild dish soap to clean the filter/plug. Again, your old toothbrush comes in handy.

Using a towel, rag, or paper towels wipe out the inside of the filter tube to clear away any debris, residue, or accumulated soap scum. Another good tool to have is a bottle brush or sponge to lightly clean out the inside of the filter tube.

Replace the filter securely and put the cover door back on.

Important Notes: Always follow your machine's manufacturer's guide as access to this filter may differ from one brand and style to another. This process requires a bit of preparation, including having a small bowl or receptacle and a towel on hand to catch the excess moisture that will come out when you open the drain pump (remember: your front loading washer is horizontal and water accumulates at the bottom!). As a friendly warning - the water in this filter may have an unpleasant aroma.

If your washer is not draining, you may need to use a shop-vac to slowly vacuum up the water as you slowly untwist the filter. This video offers helpful instruction.

8. Always finish by using the routine maintenance suggestions below to dry your machine and remove water.

Regular maintenance will keep your Washer dry and minimize the odor

Once you've tackled the musty, moldy smell and you have a clean washing machine, your next task is to regularly work to stop mold and mildew from forming! This means keeping your washing machine as dry as possible with every use. Don't drive yourself crazy (remember, fighting mold is a marathon, not a sprint) but carefully drying out your machine as a regular part of your laundry routine will definitely help keep nasty smells at bay.

• Wipeout your machine after each use, preferably with a microfiber or other lint-free towel. Pay special attention to the back of the door/window and -- you guessed it -- the rubber gasket. Again, separate the folds of the gasket and wipe out any moisture remaining in there after a load. Next, wipe out the detergent, bleach, and softener dispensers; this may require pulling the dispenser cups out per your manufacturer's instructions. Lastly, thoroughly wipe down the inside of the drum. This whole process should take less than a minute, and is well worth your time.

• Keep the door and the detergent dispenser drawer open for at least an hour after you move your load to the dryer to air out the machine.

Laundry Detergent and Products: Do's and Don'ts

Choosing the right products, and using them in the proper quantities, is absolutely essential to keeping your washer smelling clean and fresh. After all, build up soap scum and film from fabric softener make it super easy for mold and bacteria to grow rampant.

DO use a detergent specially made for HE machines like Heritage Park Laundry Essentials. These products are formulated to produce fewer suds while getting your laundry clean in smaller amounts of water.

DO use small quantities of any product. Start with about half the "recommended" amount and increase from there.

DON'T overload your washer. This can cause water and soap to accumulate and your machine not to drain thoroughly.

DO wash in warmer temperatures when possible. Hotter water = less residue.

DON'T use fabric softener. Fabric softener leaves a film behind on both your laundry (it's very bad for towels and ruins their absorbency) and your machine. If you absolutely cannot do without the scent of your softener, use a TINY amount. If you want your laundry soft and fluffy (and who doesn't?), consider using wool dryer balls to replace your softener and dryer sheets, which also leave a filmy residue.

Welcome to the World of Heritage Park Laundry Essentials

Here at Heritage Park, caring for fine fabric is our passion. As lifelong collectors of luxury sheets, towels, and table linens, we found that while many of the commercially available "gentle detergents" could still harm fabrics, or they didn't get the job done, leaving tough stains such as lipstick, coffee, gravy, and salad oil stains. We believed we could do better and decided to fill that need. After more than a year of intensive research and product development, we created Heritage Park Laundry Essentials.

Our unique formulations have the perfect balance of powerful, yet safe, ingredients to remove tough, set-in stains while remaining gentle on clothing, bedding, towels, synthetic fabrics, and even heirloom linens. Heritage park contains NO sulfates, dyes, phosphates, chlorine, bleach, or caustics. It has a neutral pH and our Original Fragrance-Free wash has been dermatologist and pediatrician approved for those with sensitive skin or allergies. It is biodegradable and is Leaping Bunny Approved to be 100% cruelty-free and never tested on animals. Suitable for regular and HE machines, and proudly made in the United States. We also produce a line of laundry accessories including pure wool dryer balls, mesh wash bags, and more. We are delighted to have you as our customer and welcome you to contact us toll-free at 800-977-1841 or info@heritageparklaundry.com with any product feedback or questions.

How To Get Mildew Smell Out Of Washer

Source: https://heritageparklaundry.com/blogs/the-laundry-lowdown/keep-your-front-load-washing-machine-clean-and-smelling-sweet

Posted by: sandlinbervelp82.blogspot.com

Share this post